For optimal operation of the power tool, carefully select the batteries. Naturally, Makita screwdriver is no exception. Therefore, it is important to understand what requirements are there, as well as what to pay attention to. Next, we will analyze all the main nuances of the battery for this equipment.
Content
What are the batteries for Makita screwdrivers
In practice, a wide variety of batteries can be used. Between themselves, they can differ not only in the voltage used, but also in manufacturing technology. In each case, the characteristics will be different.
Typically, the instructions indicate the type of battery, but often a choice of several options is allowed. Therefore, for a start it is worth looking at the technical characteristics of the main varieties.
Ni-cd
The main advantage of such batteries is the ability to quickly charge. But, at the same time, they may suffer from a “memory effect." In the case of screwdrivers, they are used in models with medium voltage.
Among the batteries there are models with voltage:
- 7.2 volts;
- 9.6 volts;
- 12 volts;
- 14.4 volts;
- 18 volts.
During operation of a battery of this type, it should be remembered that they require a high level of discharge. If you charge them without waiting for a full discharge, the service life will be significantly reduced. A good option would be to use specialized chargers, which, before charging, completely discharge the nickel-cadmium battery.
| Title | Capacity, A / h | Voltage |
|---|---|---|
| 7000 | 1.3 | 7.2 |
| 7002 | 2 | 9.6 |
| PA09, 9100, 9120 | 1.3 | 9.6 |
| 9102, 9102A, 9122 | 2 | 9.6 |
| PA12, 1200A, 1220 | 1.3 | 12 |
| 1202, 1202A, 1222 | 2 | 12 |
| PA14, 1420 | 1.3 | 14.4 |
| 1422 | 2 | 14.4 |
| PA18 | 1.3 | 18 |
| 1822 | 2 | 18 |
Ni-mh
Under this marking is a nickel metal hydride battery. They differ in a large number of allowable charge-discharge cycles. This extends battery life. The main advantage is the almost complete absence of a “memory effect".
If you did not discharge the battery completely and immediately began to recharge, there is nothing to worry about. But, if the battery lay down in this state for 20-30 days, it is better to completely discharge it before charging.
In the range of batteries for Makita screwdrivers, you can find options with the following voltage:
- 7.2 volts;
- 9.6 volts;
- 12 volts;
- 14.4 volts;
- 18 volts.
This covers almost all popular screwdriver models.
| Title | Capacity, A / h | Voltage |
|---|---|---|
| 7034 | 2.6 | 7.2 |
| 9034 | 2.6 | 9.6 |
| 9134 | 2.6 | 9.6 |
| 9135, 9135A | 3 | 9.6 |
| 1234 | 2.6 | 12 |
| 1325, 1235A, 1235F | 3 | 12 |
| 1434 | 2.6 | 14.4 |
| 1435, 1435F | 3 | 14.4 |
| 1834 | 2.6 | 18 |
| 1835, 1835F | 3 | 18 |
Ni-Mh Makstar
These batteries are the company's innovative solution. In fact, this is a technology that provides digital data exchange between the battery and the charger. This approach allows you to most effectively charge the battery, as well as extend its service life. The range includes average batteries for voltage, there is also a 24-volt battery.
It is also based on a nickel metal hydride battery, but it is equipped with special sensors and a storage device. When the charger is connected, it reads all data from the battery and calculates the most optimal charging mode. As a result, it is possible to extend the battery life, as well as improve the efficiency of its use.
| Title | Capacity, A / h | Voltage |
|---|---|---|
| BH9020, BH9020A | 2 | 9.6 |
| BH9033, BH9033A | 3.3 | 9.6 |
| BH1220, BH1220C | 2 | 12 |
| BH1233, BH1233C | 3.3 | 12 |
| Bh1420 | 2 | 14.4 |
| Bh1433 | 3.3 | 14.4 |
| Bh2420 | 2 | 24 |
| Bh2433 | 3.3 | 24 |
Li-ion
The lithium battery has sufficient power consumption. This allows it to be used in conjunction with powerful devices that require a higher voltage. Therefore, in the line you can find:
- 14 volts;
- 18 volts;
- 36 volts.
An important element of this type of battery is the charge sensor. It avoids overcharging the battery, which also protects against fire.The main advantage of this type of battery is its reliability as well as its long service life.
| Title | Capacity, A / h | Voltage |
|---|---|---|
| BL1415 | 1.5 | 14 |
| BL1430 | 3 | 14 |
| BL1815 | 1.5 | 18 |
| BL1830 | 3 | 18 |
| BL3626 | 2.6 | 36 |
What voltage are batteries for Makita screwdrivers
Often people wonder what kind of voltage a screwdriver can have. In fact, much depends on the model. Therefore, you should always look at this option when buying. It is also important to consider this option when choosing a replacement battery.
For a better understanding of the situation, we list all the possible options for voltage. We clarify what type of battery can be found here.
- 7.2 v.Here you can find Ni-Cd and Ni-Mh batteries. In this case, the capacity can be in the range of 1.3-2.6 Ah.
- 9.6 v. A more common modification, there are all types of Makita batteries, except lithium-ion ones. Maximum capacity 3.3 Ah.
- 12 v. Differ in variety. Here you can find almost all varieties, and a large number of containers. In general, such a voltage is considered classical and can be used almost everywhere.
- 14.4 v. In this line, Ni-Mh Makstar batteries are considered the most popular. They provide the longest service life and are also able to maintain optimal capacity.
- 18 v. Only Ni-Cd and Ni-Mh are also represented. They are found relatively infrequently, usually in special series of equipment.
- 24 v. Presented only in the Ni-Mh Makstar series. Differ in the increased reliability.
- 36 v. It uses only Li-Ion batteries. This allows you to optimally solve problems when working with a powerful professional tool.
How to choose a new battery for a screwdriver
First of all, you should look at the voltage. It is usually indicated by a Latin beech v on the body of a screwdriver. If you make a mistake, then at best the device simply will not work. And if the battery turns out to be with a high voltage, you can damage the filling of the screwdriver. So, the first thing to watch is precisely the allowable voltage.
Another point to consider is the type of battery. It just seems that it doesn't matter which method is used to create the battery. In fact, this nuance is worth considering.
The fact is that all types of batteries differ in the features of energy transfer and charging. Therefore, it is possible to apply a battery of a certain type to a screwdriver that is designed for a different type. But, this will reduce the battery and tool life.
Be sure to consider the parameters of the tank. The manufacturer can find battery interchangeability tables. This will help you choose the appropriate option if the original battery is missing.
Interchangeability of batteries with more and less power
To begin with, it is worth noting that looking at the power parameters is useless, this is not indicated on the battery. Usually, by capacity is meant battery capacity. Therefore, here we will consider whether it is possible to purchase a battery with a larger capacity for your screwdriver.
Here you need to look at the charger. It is designed to charge a battery with a well-defined capacity. And if the device still pulls a smaller parameter, then charging the battery with a larger capacity will fail. This ultimately leads to a decrease in the life of the new battery.
As a result, we can say that it is not worth replacing the batteries with a larger or smaller capacity. But, if such a need arose, be sure to buy the same charger.
