HTC batteries

HTC batteries

Everyday use of a modern phone includes modern games, listening to music, watching videos, social services. networks and internet sites. At the same time, the mobile device is in the on state for a long time, which is why the battery quickly runs out.

As a result, frequent recharging of the device is required. From this, the battery life, calculated for a certain number of charge cycles - discharges, is quickly exhausted.

Why batteries in modern devices die quickly

A lot of difficulties for the owners are added by the periodic improvement of the model line of phones of the Taiwanese company. Now it’s not uncommon when HTC smartphones come with 5-inch Full HD screens, multi-core processors, sophisticated video cards, all of which decently increased the battery load. As a result, after 1-2 years of operation of a new product, a replacement power supply is required.

Phone game
Active use of the phone at the same time gives a high load on the battery and leads to its overheating.

Obviously, if your favorite gadget quickly loses its charge, it's time to update the battery. You will need to choose the most “able-bodied" analogue and place it in the battery compartment of the device yourself.

What to consider when choosing a new HTC battery

When choosing a new battery, you should consider the main parameters of the power source of your mobile device. They are available in the manual for the device issued upon purchase, and are duplicated on the manufacturer’s website. Choosing an accessory compatible with your phone model will be optimal when you consider the following points:

  • it is not necessary to chase trendy innovations if in the ratio “price-quality-durability” they are inferior to the standard battery;
  • the rated voltage of the power source must correspond to a supply voltage of 3.7-3.9 V;
  • the electric capacity of the battery, measured in milliampere-hours, is now in the range of 1150-4000 mAh and has a tendency to increase;
  • the number of complete charging cycles ↔ discharging 500–1000 before the onset of battery degradation is considered acceptable at present;
  • for the product to be inserted into the battery compartment, the dimensions of the product L, B, H (mm) must exactly match the original from HTC;
Read also:  How to charge the phone battery
li pol battery
li pol battery for HTC

Important! Interchangeable with original HTC batteries are considered certified analogues with identical technical parameters. Third-party items are on sale, some of which are HTC suppliers for the assembly line of phones.

To avoid counterfeiting the battery, the choice should give preference to popular global brands and trusted suppliers of products.

Technologies for various types of HTC batteries

 Today, HTC autonomous gadgets are equipped with lithium-ion or lithium-polymer batteries:

  1. Li-ion (li ion) batteries are the most common in modern HTC smartphones. They do not require special maintenance, are characterized by high energy density and low self-discharge current. The disadvantages of the li-ion type include a reduction in the energy output to tens of percent at temperatures below 0 °. Long-term storage is contraindicated for such power sources. It leads to degradation of component composition and premature exhaustion of the resource of nutrients.
  2. Lithium polymer (li pol) batteries are an improved version of li ion, differing from the latter using a polymer material as an electrolyte. In terms of energy density per unit mass, they do not differ from (1), but they have a lower voltage drop. As the charge li pol remain operational in the temperature range from −20 ° C to + 40 ° C. It is important that capacitive elements are produced with a thickness of 1 mm or more, and thanks to the flexibility of the plates, almost any shape is obtained.
li ion battery
li ion battery for HTC

HTC is very young therefore there are no devices equipped with nickel-cadmium (ni kd) or nickel-metal hydride (ni mn) batteries.

If initially there was a lithium-ion battery, then do not put lithium polymer instead. We must choose the same technology as it was, although if you wish you can take a more capacious battery.

How to replace the battery on HTC phones

Previously, almost all models had removable batteries, but now manufacturers are fighting for the thickness of their gadget, so smartphones with non-removable batteries are increasingly being produced, in which it is much harder to replace the battery.

Read also:  Why is the battery running low on my smartphone

On phones with removable batteries

Replacing a removable battery does not require much effort from users. It is enough to fingernail the lid of the battery compartment and remove the feed element from the tray, introducing a new one instead.

Without rear panel
HTC phone without back panel

For example, for HTC Desire HD:

  • it is necessary to put the switched-off device on the palm of the USB-connector to itself so that the front panel looks down;
  • the battery compartment cover will be on the right side, you should pull the protrusion with your fingernail and it will open;
  • A standard battery is carefully removed from the tray and replaced with a new one.

On phones with non-removable batteries

Every year the number of devices with non-removable batteries is growing. Consider the sequence of operations to replace the battery using the example of the HTC One model:

  1. Armed with a plastic spatula or pick, you need to disconnect the screen from the body, passing around the entire perimeter of the device. To soften the glue, it is allowed to warm up the device by directing the air flow of the hair dryer with a thin nozzle to the joints.

Attention! At this stage, it is important not to scratch the coating and chips of separable parts. It is recommended to carry out the dismantling procedure with a plastic tool and a suction cup, do not use a metal screwdriver, knife or scalpel.

Disassembled smartphone
HTC smartphone parsed
  1. Flip the display to the side by turning it on the hinge that connects to the case without damaging the screen cable.
  2. By analogy with (1), unhook the rear metal cover from the device body. It should be noted that it is fixed with 8 clips, and the joints are connected by glue.
  3. Remove the black assembly with the electronic components and unscrew the 7 mounting screws on it.
  4. Remove the motherboard by peeling the surface off the battery, then remove and install a new battery.
  5. Repeat the operations in reverse order.

Before you engage in self-replacement of a non-removable battery, we recommend that you watch the clips onyoutube.comThere are detailed video instructions for each phone model.

If the self-replacement procedure seems complicated, contact your nearest service center for assistance.

Questions leftBattery for HTC or have something to add? Then write to us about it in the comments, this will make the material more useful, complete and accurate.

Read also:  How to check phone battery capacity
Add a comment

Batteries

Charging device