Fast Charge for Huawei Phones

Huawei fast charge

Many modern phone models are equipped with high-capacity batteries, so the process of charging such devices can last several hours. To maximize the efficiency of charge recovery, special quick-action memories are used. One of these devices is Huawei's fast charging, which is designed for gadgets manufactured by this Chinese company.

What is fast charging in Huawei smartphones

Fast Charging The Huawei is an electric energy converter equipped with a control chip, with which the optimal voltage is applied to the port of the mobile device. The current strength in this memory model is significantly higher than in the normal capacity recovery mode. Due to the supply of more current and the process of charging the battery is much more intense.

Despite the great power, this type of modern technology is safe to use. The controller produces an increase in amperage gradually, therefore, increased heat generation on the battery or in the cable is not observed.

The device for the rapid restoration of capacity Huawei is not the only model of the charger that can carry out fast battery energy, but in terms of speed it is practically not inferior to the world's most famous Quick Charge technology.

Photo 1

Which Huawei phones support fast charging

The quick charge function can only be activated if the smartphone supports this technology. Unfortunately, this method only works on the latest gadget models of this company. One of the most popular Huawei smartphones, capable of restoring the battery in accelerated mode, is the Huawei Mate 9 model.

In addition, Huawei P10 Plus is equipped with such a function. This phone has a 4000 mAh battery. At the same time, the process of restoring the capacity of even a fully discharged battery takes no more than 1 hour.

Read also:  Fast Charge for Honor Phones

The Honor 10 smartphone and the Huawei MediaPad M5 tablet computer, which can be charged at maximum power up to 22.5 watts, also support the fast battery recovery function.

How to enable the fast charge function in Huawei

In order to connect the smartphone to the charger, you must first activate this function. This operation is performed in the following sequence:

  • Go to the phone settings.
  • Find the "Service" section.
  • Click the battery icon.
  • In the upper right corner, click on the icon of three points located vertically.
  • Click "Settings".
  • Find the “Quick Charge” item and set the position of the switch opposite, to the “On” position.

Now the accelerated recovery function is activated and when you connect the charger through the cord to the gadget, the time to charge the battery will be significantly reduced.

Photo 2

How to disable fast charging on Huawei

If you disable this function, the tablet or mobile phone will be charged in standard mode. This operation is carried out in the following sequence:

  • Go to the settings of your smartphone or tablet.
  • Find the "Service" section.
  • Click on the battery icon.
  • Go to battery settings.
  • Select the “Quick charge” mode from the list and turn it off by moving the virtual switch to the left.

Now the possibility of fast charging is completely absent, but, if desired, it can be easily turned on by moving the switch to the “On” position.

Is fast charging harmful for phones

This technology practically does not harm the battery of a mobile phone. Such batteries can cause serious damage to the battery only if the increased current strength is supplied throughout the entire charge cycle.

The technology for restoring the battery capacity at an accelerated pace is programmed in such a way that when the battery is 70% charged, charging is transferred to normal operation.

The negative impact on the battery is not caused by the use of this type of technology, but by frequent and incomplete restoration of the battery capacity. The battery is designed for a limited number of charge / discharge cycles, so if the gadget is connected to the adapter several times a day, then, naturally, the entire battery life will be used up within 1 year.

Read also:  Charger Cedar Auto 5

Photo 3

So that when using fast charging, the battery does not wear out very quickly, it is recommended that after connecting the adapter, charge the battery 100% or, better, 90-95%. In addition, it is not advisable to completely discharge the battery.

Connect the charger when the charge level drops to 15 - 20%. The daily application of these simple rules will significantly increase the effective life of the battery when using wireless charging or in fast recovery mode.

Have questions or have something to add to the article? Then write to us about it in the comments. This will help make the material more complete and useful!

Add a comment

Batteries

Charging device