Battery for Kia Rio 3

under the hood of the Kia Rio 3

Kia Rio 3 is a compact and economical Korean car. The battery that is installed on the vehicle is also reliable and has a long service life. But the deadlines are drawing to a close, and the owner needs to choose the right battery.

Life and when to change

In order not to miss the deadlines for replacing the battery, you need to buy a new one in advance. Since modern machines cannot be started with an external starter, how could this be done with mechanics.

Most often, when the battery dies, the car may not start from the first or second time the key is turned in the ignition switch. This happens both on a frosty morning in the cold season, and in the summer. You have to look for another car from which you can light up.

Usually rechargeable batteries are designed for 4-5 years of service. Then they slowly fade away. The capacity is lost, the plates are destroyed. Besides the fact that they die from aging, they are affected by natural negative factors:

  • dirt roads and rough terrain. Shaking while driving on them brings the battery's death closer. This is due to vibration, which negatively affects the plates;
  • Long periods in cold rooms increase battery drain. If the battery runs out completely, then nothing will restore it.

2012

The following parameters also affect the lifetime:

  • driving style;
  • frequency of use of the vehicle;
  • original quality battery or cheap chinese know-how.

Note! These three additional characteristics can be used to determine approximate battery discharge times. With aggressive driving, frequent operation and a non-original battery installed, the latter will fail before it turns 4 years old.

What characteristics should you look at when choosing

If the car owner cannot find a native battery from Kia Rio 3 in his city, then he can always establish a good analogue. What you need to pay attention to when buying such a battery:

  • Dimensions The battery should fit in size to the site under the hood;
  • Starting current. Choose from 450 to 700 A. The colder the region, the higher the parameter should be. Kia Rio III refers to the small car;
  • Capacity. The more powerful the car and the more its equipment, the higher the capacity should be. As a rule, from 55 to 75 A / h should be enough;
  • Polarity. The reverse is displayed like this: [- +], that is, a plus on the right;
  • Year of issue. Long-term storage of the battery reduces its operational period; ideally, it should be no more than 1 year old.
  • Type of terminals and housing. Cars assembled in Russia and Europe have standard terminals, and those brought in from Asia will have the ASIA type.

Attention! If all of the above conditions satisfy the requirements for the battery Kia Rio 3, then such a battery can be taken.

Terminal type
Terminal type

How to choose a battery

The manufacturer puts the Kia Rio 3 batteries of the Asian type. They differ from the European reverse polarity. That is, the “+” sign is on the right, and not on the left, as in Europeans.

For Kia Rio III 2011 - 2015

A standard European assembly battery has the following characteristics:

  • dimensions - 242x175x190 mm;
  • capacity - 55 - 70 A / h;
  • starting current - 450 - 700 A;
  • voltage 12 V;
  • case - L2.
Read also:  Laptop battery does not charge

With the L2 case, the batteries do not fit on the platform for Asian-type batteries.

For the Asian market:

  • dimensions - 200-230x172x205-220 mm;
  • capacity - 65 - 75 A / h;
  • starting current - 450 - 700 A;
  • voltage 12 V;
  • case - D23L. With side for mounting.

In the Asian version, as described above, the polarity of the terminals will be reversed. This should not be forgotten.

EngineStarting current, ACapacity, AhType of shellDimensions, mm
1.4 (107 h.p.)430-65055-70Standard242x175x190
1.4 (107 h.p.)430-65055-70ASIALenght: 206-230
Width: 170
Height: 184-225
4-speed 1.6
(123 h.p.)
480-65055-70Standard242x175x190
4-speed 1.6
(123 h.p.)
480-65055-70ASIALenght: 206-230
Width: 170
Height: 184-225
6-speed 1.6
(123 h.p.)
500-70060-75ASIALenght: 206-230
Width: 170
Height: 184-225
5-speed 1.6
(123 h.p.)
500-70060-75ASIALenght: 206-230
Width: 170
Height: 184-225

For Kia Rio III Restyling 2015 - 2019

Battery for Kia Rio 3 new models of restyling in 2015 and up to 2019, the parameters remain the same. Also, the car owner will always find information about the battery on the car in the Kia Rio 3 operation book.

EngineStarting current, ACapacity, AhType of shellDimensions, mm
1.4 (107 h.p.)430-65055-70Standard242x175x190
1.4 (107 h.p.)430-65055-70ASIALenght: 206-230
Width: 170
Height: 184-225
1.6 (123 h.p.)550-70060-75Standard242x175x190
1.6 (123 h.p.)550-70060-75ASIALenght: 206-230
Width: 170
Height: 184-225

What models are worth paying attention to

When buying, you need to give an advantage in the selection to the following models:

  • Solite 85D23L. Full compatibility with the on-board network of Kia Rio 3. The walls of the plates are doped with calcium. This increases the life of them, and accordingly the entire battery;
  • Tudor TA 654. It has a large capacity unlike others. Such a battery can be used in vehicles stuffed with all kinds of electronic equipment;
  • Hankok 85D23L. Combines features such as reliability, quality and cost of the device. Warranty for such batteries is given up to 24 months. But the manufacturer promises that the battery will last 4 years;
  • Tyumen 6 ST - 60. It has high resistance to vibration, low temperatures. It can be put in cars that are operated in the far north.
Read also:  How to maintain and repair a maintenance free battery

All of the above batteries are original. They will allow you to start the engine at minus 40, provide a stable supply of electricity.

Photo 3

How to change the battery

To change the battery, the car owner needs to carry out a couple of simple actions. You will need a key for 10 and 13. The replacement steps are as follows:

  1. Open the hood.
  2. Remove the screw on the wire that is connected to the negative terminal and disconnect it.
  3. Do the same with the right wire.
  4. Remove the screw that holds the battery on the stand from below.
  5. Remove the battery.
  6. Put a new device.
  7. First tighten the bolt on the mount.
  8. Then, in the reverse order, connect the wires to the terminals.

Now the car owner can use the new battery for several more years.

Conclusion

The battery also needs care. Avoid oxidation and rusting of contacts. This will lead to a fast discharge. Do not allow penetration of the car body. Check all wires for gnawed, torn off and replace them in time. Only when caring for the battery, the latter will serve the car owner for many years.

Still have questions about your choice Battery for Kia Rio 3 or have something to add? Then write to us about it in the comments, this will make the material more complete and accurate.

Add a comment

Batteries

Charging device