Xbox One and 360 Joystick Batteries

Battery

XBOX gamepads are very popular among gamers. Such manipulators are bought in large quantities due to the high quality of materials and high-quality assembly.

The wireless joystick is equipped with special power sources that allow the device to work for a long time. In addition, in gamepads, you can use conventional batteries and rechargeable finger cells. The batteries suitable for installation in XBOX ONE and XBOX 360 devices will be described in detail below.

Types of Power Supplies for XBOX Joysticks

For gamepads of this type, various power supplies can be used. Conventional batteries can be installed in devices equipped with special compartments for finger cells.

Rechargeable batteries can also be used, which must be inserted into a special charger to restore functionality.

Regardless of the type of battery, the purchase of a low-quality product can lead to the fact that for some time the joystick cannot be used due to discharged batteries. For this reason, you should carefully approach the problem of choosing a new battery or battery for XBOX manipulators.

AA Batteries

Regular finger batteries can be used for installation in XBOX joysticks. Such products are relatively inexpensive, but they need to be replaced every time the power source sits down. It will not be possible to charge the batteries; moreover, such a procedure can be dangerous.

aa

The cheapest products of this type are salt batteries. Unfortunately, the price advantage is their only positive quality, because such products are significantly inferior in terms of durability to more modern batteries.

Alkaline batteries are more adapted to long-term load, especially good results of the duration of work with products of well-known manufacturers.

Read also:  AA rechargeable batteries

Lithium batteries are quite expensive products, but the low weight and long working life attract gamers for whom replacing the battery is an action that has not been worked out to perfection, in contrast to the direct control of the levers and buttons of the gamepad.

AA batteries

To achieve complete "electrical independence" when using the XBOX manipulators, you can use rechargeable power supplies of size AA. Finger batteries are fairly common products, so you can purchase them at any specialized store.

mi-mh aa 1.2v

Chargers for such products will also not be difficult to find in the nearest radio market or in retail outlets specializing in the sale of electronics. In order not to interrupt the game while charging the batteries, it is recommended to purchase 2 sets of rechargeable batteries.

When choosing new products, care should be taken, because by chance you can purchase batteries not intended for such an installation. For example, lithium rechargeable power supplies have a voltage of 3.7 volts, so installing them instead of ordinary batteries can lead to failure of the electronic circuit board of the manipulator.

Original batteries for XBOX

Original batteries for XBOX ONE S, ONE X, 360 and other modifications are quite expensive devices. Such products are manufactured using modern technologies, so the number of charge / discharge cycles, until the battery life is completely depleted, can be more than 1000.

Note! Even with the purchase of very cheap salt batteries, the total cost will be tens of times higher than the cost of one branded battery.

To charge the original rechargeable power source, you will also need to purchase a special device that runs on a USB port. The advantage of using the memory is that you can not stop playing your favorite games if the battery is dead.

The disadvantage of this use can only be called the fact that the manipulator with a slight movement of the connected connector turns into a wired device.

Read also:  Battery 16340

Chinese batteries for XBOX

On the Aliexprexx marketplace, you can purchase XBOX batteries at an affordable price. Such products will be full analogues of the original batteries and practically not inferior to the latter in terms of capacity and other important characteristics.

Chinese batteries can be purchased either separately or in a kit that already has a controller for charging. Despite the higher cost of this acquisition option, it is better to spend more money and purchase products that will be fully compatible with each other.

Buying a battery on Aliexpress is a great solution, but the packages from this eastern country take a very long time, so you should take care of the order in advance, at the first sign of inoperability of the original battery.

XBOX ONE and 360 Power Supply Compatibility

The batteries installed in the battery compartment are completely interchangeable. For both types of game controllers, you can use the same AA batteries or rechargeable finger batteries.

Photo 1

Original portable power sources between these gaming devices are not interchangeable. This feature of joystick models should be taken into account both when buying batteries offline, and when placing a remote order on the website of an online store.

How to charge batteries for XBOX

If finger batteries are used to power the gamepad, you will need to remove the elements from the compartment and install them in the charger. It is advisable to use memory devices equipped with a controller. Such devices will inform about the end of the charge cycle by turning on the green LED.

Original batteries and their Chinese counterparts can be charged without removing the joystick. It is enough to connect the charger to a special connector so that you can not only completely restore the electric supply of the battery, but also continue the game without waiting for the end of the charge cycle.

Have questions or have something to add? Then write to us about it in the comments, this will make the material more complete and accurate.

Read also:  LiFePO4 batteries
Add a comment

Batteries

Charging device