Battery 110 a / h 12 v

For owners of powerful cars, the issue of acquiring a new battery is often too acute. Conventional standard batteries with a capacity of 55 - 65 Ah are completely unsuitable for this purpose, and cargo batteries do not fit in their regular place and are not charged well enough from the generator. 12 volt batteries for 110 Ah allow you to completely solve this problem, providing consumers of the automotive network with the necessary amount of electricity.

How much does a battery weigh 110 a / h

The plates of any acid battery are made of lead, which is a very heavy metal. In its pure form, the amount of this element by weight takes about 75-80%, therefore, a battery with a capacity of 110 Ah cannot have a low weight.

An electrolyte charged and fully charged battery of this type weighs between 25.5 and 27 kg. Heavier AGM or EFB can reach 30 kg. Therefore, the body of the product is always equipped with 2 powerful handles.

Battery Dimensions and Terminal Options

Batteries for 110 a / h can with direct (1) and reverse (0) polarity. You can find models for trucks, they can also be with both polarities, only they will be indicated by the numbers 3 (reverse) and 4 (direct).

The batteries are carried out in several cases, so the dimensions can vary greatly.

Some models may vary slightly in size by a few mm. This is due to the use of thicker lead plates in the manufacture of batteries and, as a rule, does not affect anything, but just in case, it is recommended to measure the place for installing the battery.

Batteries with a capacity of 110 ah are available with a different arrangement of the negative terminal on the product body. For the owner of a powerful passenger car or a small truck, it will not be difficult to choose a model that can be installed on a vehicle without the need to lengthen the negative conductor.

How much electrolyte is in the battery 110 a / h

The 6ST-110 battery consists of 6 cans containing lead plates, separators and an electrolyte. In order for a chemical reaction to occur between the negative and positive plates, each can is filled with a liquid, which is a weak solution of sulfuric acid.

The volume of electrolyte, which is necessary for the normal course of the process of charging and discharging the battery, directly depends on the capacity of the battery. At a 110 ampere / hour battery, each can is refueled by about 1.15-1.4 liters, which ultimately gives a volume of about 7-8.4 liters.

The electrolyte volume directly depends on the manufacturing technology. The more lead it contains, the more plates and less liquid volume. These batteries are heavier and better and more reliable.

How to charge the battery 110 a / h

If you charge a standard car battery with a small current, then the charging process can take a very long time, but if you apply an increased current, then the electrolyte can boil and evaporate, after which the plates will become bare and crumble.

A 110 Ah battery is no exception to this rule. Therefore, it is important to correctly set the value of current and voltage. This value is calculated very simply. 10% of capacity is taken, that is 11 amperes. Voltage 14.4-14.6 volts.

If there is a deep discharge of the battery, it is recommended to carry out continuous charging with less current, for example, 5 A for 24 hours.

For which cars is the battery 110 a / h suitable

12 v 110 ampere / hour batteries are installed on premium cars. Such machines are equipped with a powerful internal combustion engine, the launch of which requires more starter power.

Cars equipped with the Start-Stop engine start system are even more demanding on the power source. For them, you definitely need to choose a battery made by AGM or EFB technology. Because the standard battery will not have time to charge in traffic congestion, as the engine will constantly turn off.

Most of the 110 Ah batteries sold on the market are used as starter batteries, but there are also models that are used exclusively as traction devices. The traction battery can withstand numerous deep discharge cycles, while the technical characteristics of such batteries do not change even after a long period of use.

Which battery 110 a / h to choose and what to look for

In order for the battery to last as long as possible, it is recommended to choose products made using calcium doped lead. When buying a new battery, you should pay attention to the production date, which is applied to the body of the product. Depending on the type of battery, the maximum pre-sale storage period is from 6 to 18 months, so if the battery is on the counter for longer than this period, then you should refuse to buy.

Acquisition of products from well-known and reliable brands will also reduce the likelihood of buying defective products. To date, the highest quality batteries with a capacity of 110 A / h are manufactured by the following companies:

Also, when choosing a new product, you should inspect the battery housing, which should be free from any damage, and the label is easy to read.

Did you have or have 110 Ah battery? Then tell us in the comments which one and about your impressions about him, this will greatly help other motorists and will make the material more complete and accurate.

Reviews

Alexander. Nakhodka
I purchased a TITAN 110 Ah battery to replace a standard battery with a capacity of 100 amperes. The battery copes with a bunch of additional consumers of electricity.

Novel. Angarsk city.
What was needed was a more powerful battery, but suitable for the size of an old battery. Installing Topla 110 Ah batteries completely solved the problem of missing amperes / hours.

Nikolay. Kursk
A 110 Ah 12 volt battery is great for installation on an SUV. I recommend the purchase of batteries of such power to those who are fond of jeeping.